Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5

MakersDRIVER 5UP Pro - Drive up to 70 LEDs!

1.00 Ounces
Calculated at checkout


Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

The MakersDRIVER 5UP PRO takes building finished DIY LED fixtures to a new level by simplifying power connections and providing multiple options for dimming control.


• MakersDRIVER 5UP PRO, with Overlay Cover
• LDD "H" Meanwell Drivers not included
• Docks into the MakersLED Heatsink
• Drives up to 70 3v LEDs up to 1000mA (45V available per channel)
• Up to 5 channels of dimming (14 LEDs/channel)
• Manual dimming interface (requires accessory board, sold separately) MakersLED 5UP manual dimmer module
• Multiple external control options available:
- Data interface with MakersCONTROLLER lighting controller (addressable to 5 channels)
- Accepts 0-10V DC analog lighting control signal (requires accessory board, sold separately - MakersLED 5UP manual dimmer module)
• Daisy chain multiple MakersDRIVERS back to a MakersCONTROLLER
• Powers one 12v Fan (no extra fan power supply needed!)
• Fan failure detection – Flashes LEDs to alert failure (if fan is detected upon start-up)
• Sockets provided for Meanwell LDD drivers allow for removal, upgrade and replacement
• Utilizes inexpensive 48V DC power supplies (not Included)
• Fused for added electrical safety
• May co-exist with MakersDRIVER 2Up PRO when used with MakersCONTROLLER

90 day warranty*




Not Included:
LDD "H" Drivers, Heatsink, 48V Power Supply, Wire/cables, Fan, LEDs.

MakersDRIVER 5up Installation and Accessories

Specifications are subject to change

Recommended for MakersLED Heatsinks 1ft and greater.
*Warranty: 90 day limited warranty against defects in materials and workmanship. MakersLED LLC will determine the root cause of the defect, and your item may be repaired or replaced free of charge. Customers pay for shipping to our service location and we pay for the return shipment. Warranty does not cover failure caused by accident, misuse, abuse, alteration, or faulty installation.

Product Videos

LEDGroupBuy.com MakersDRIVER LDD removal (00:12)
Removing Meanwell LDD driver from MakersDRIVER
  • LEDGroupBuy.co...
    Removing Meanwell LDD driver from MakersDRIVER

Other Details



There are 1 review(s) for MakersDRIVER 5UP Pro - Drive up to 70 LEDs!

  • Great while they last

    by Reef-as-a-distraction – 23rd Jun 2016

    These units are fantastic, and clean up the wiring nest of multiple 2UP units in addition to adding a 5th channel. Perfect for the Lumia arrays.

    HOWEVER, I have had three bad units (out of 5). One was missing sockets from the factory, the other two died within six months of use. These are great little units when they're working, but it's a bummer when they die out.

    Even with 5x700mA drivers, the local temp around the board is quite high. Unfortunately, the slips-in-the-extrusion design also means that there's no good way to get contact for thermal dissipation. Bummer.