Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10

MakersDRIVER - Professional grade dimmable LED driver

1.00 Ounces
Calculated at checkout


Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

**UPDATE** Out of stock.  Upgrade available here: MakersDRIVER 5UP Pro - Drive up to 70 LEDs!

The MakersDRIVER takes building finished DIY LED fixtures to a new level by simplifying power connections and providing multiple options for dimming control.

The MakersDRIVER utilizes an inexpensive 48V DC power source to drive up to 28 LEDs, a fan, and an optional controller. It provides 2 dimming channels, each capable of driving 14 LEDs. The MakersDRIVER incorporates user-replaceable Meanwell LDD series LED drivers. Dimming options include integrated knobs, 0-10V input, and a serial data interface. 

MakersDRIVER Board, Plastic Housing, Knobs 
2 Meanwell LDD 1000mA LED Drivers
Stainless Docking Hardware


  • Neptune Apex ready Neptune Apex Ready
  • Docks into the MakersLED Heatsink
  • Drives up to 28 3v LEDs at 1000mA (45V available per channel)
  • 2 channels of dimming (14 LEDs/channel)
  • Jumper included to listen on CH3 and CH4 if combined with MakersCONTROLLER allowing for up to 4 channels of control
  • Manual Dimming Interface
  • Multiple External Control options available:
    • Accepts 0-10V DC Analog lighting control signal (compatible with DIM4)
    • Data Interface with MakersCONTROLLER lighting controller
  • Daisy chain multiple MakersDRIVERS for single point of control with timed dimming
  • Powers one 12v Fan (no extra fan power supply needed!)
  • Fan failure detection – Flashes LEDs to alert failure (if fan is detected upon start-up)
  • Sockets provided for Meanwell LDD drivers allow for removal (upgrade and replacement)
  • Your choice of 2 Meanwell LDD Drivers
  • Utilizes inexpensive 48V DC power supplies (not Included)
  • Fused, Reverse polarity protection
  • Docks into 1ft or greater MakersLED heatsinks with space for a fan
  • 90 Day Warranty*

Not Included:
Heatsink, 48V Power Supply, Wire/cables, Fan, LEDs.

Specifications are subject to change

*Warranty: 90 day limited warranty against defects in materials and workmanship. MakersLED LLC will determine the root cause of the defect, and your item may be repaired or replaced free of charge. Customers pay for shipping to our service location and we pay for the return shipment. Warranty does not cover failure caused by accident, misuse, abuse, alteration, or faulty installation.

Product Videos

LEDGRoupBuy MakersDriver for DIY LED Systems (01:40)
MakersDRIVER can be purchased at http://www.ledgroupbuy.com/makersdriver-professional-grade-dimmable-led-driver/ LED Driver designed for DIY LED application in conjunction with MakersLED heatsink kit
  • LEDGRoupBuy Ma...
    MakersDRIVER can be purchased at http://www.ledgroupbuy.com/ma...
  • LEDGroupBuy.co...
    Removing Meanwell LDD driver from MakersDRIVER

Other Details



There are 2 review(s) for MakersDRIVER - Professional grade dimmable LED driver

  • Driver Mc Ivor

    by Bruce – 28th Dec 2013

    Works great, all dimming functions are smooth and extinguish fully if need be, unlike some comparably priced drivers. Extra clean install and the dedicated 3 pin fan outlet is very cool !
    Well Done on the design and build.

  • Awesome power supplies

    by Mike Mann – 10th Jun 2013

    These work GREAT! I love that it has selectable drivers and a fan connector. Very clean install, especially if you are using a Makers heatsink.