MakersLED CONTROLLER - Sunrise / Sunset controller for MakersDRIVER

Product Description

***Update*** In stock and shipping daily

The MakersCONTROLLER works in combination with MakersDRIVER(s) to create sunrise, sunset and other special effects throughout the day. Once the color ratios have been independently dialed in on the MakersDRIVER knobs, the MakersCONTROLLER scales those ratios up and down to match a user defined schedule.

Included:

One MakersCONTROLLER with integrated 10ft Cable
Two 3.5mm 18” Data Cables (for daisy chaining multiple MakersDRIVERs)

Features:

Simulates a natural environment by adjusting the the intensity of your MakersDRIVER(s) according to a user defined schedule
Simulates sunrise, sunlight, sunset, and moonlight
Provides a single remote control point to virtually an unlimited number of MakersDRIVER(s)*
Special Effects include lunar cycle, noon peak, and basic cloud cover
Demo/Preview mode provides a means to quickly scroll through every minute of the day to preview and verify your settings
Installation is as simple as plugging in a single cable into the MakersDRIVER
Powered from the MakersDRIVER - requires no external power source or additional cables
Provides 5 channels of remote control for special effects
Integrated clips to mount to the side of the MakersLED heatsink
Integrated screw tabs for wall mounting and hanging
Simple programming & menu structure:

* Each MakersDRIVER acts as an active signal repeater. The MakersCONTROLLER has been tested with 21 MakersDRIVERs using 1.5ft and 24ft cables cables.

Not Included:
MakersDRIVER, Power Supply, Wall Mounting Hardware

View the Users Manual

Reviews

There are 4 review(s) for MakersLED CONTROLLER - Sunrise / Sunset controller for MakersDRIVER

Awsome

by Scott – 1st Feb 2014

Awesome. Used the Markers drivers and controller. Amazing performance and easy of installation. Makes my first LED project look professional. Thanks to all the help from Ben Wagner.
Makers Controller feature request

by Jim – 2nd Aug 2013

I have been using the Makers controller for a couple of months. I set it up with a Makers driver running 27 Cree LED's with a 2 blue to 1 warm white ratio.It is simple to use and comes in a professional looking enclosure. It can mimic the sunrise, sunset, noon peak, cloud cover and the lunar cycle. and One feature that I would like to see added is the ability to set separate start times for each channel. I have one channel that has all blue LED's and one that is predominantly white. It would be nice to have the ability to run the blue channel independently for an hour before the whites come on and then another hour or two after the whites turn off. Overall it is a great value for the price, functions reliably and I would highly recommend it.
Makers Controller, Driver,and Power Supply

by Ted Lietz – 15th Jun 2013

I recently purchased a Makers 250 watt 48 volt pwr supply, Makers Driver pro grade, and a Makers Controller- sunrise/sunset , to take the place of 3 Inventronics 40 watt 700ma drivers .that I used to power and control 12 Royal Blue LEDs,12 Cool White LEDs, 2 Violet,1 Red, 1 turquoise LEDs over my 65 gallon tank, all mounted on a Makers 12 inch heat sink.
This change freed up a lot of space equipment and time..The whole change only took me a couple of hours, mainly to remove the old equipment and wiring.... every thing was hooked up as per instructions and worked exactly as described the first time...
I got rid of the clutter, and now can control sunrise/sunset, less pwr supplys as the drivers now power the fan.
I plan to do my second LED Fixture as I did the first....I highly recommend all of Makers Equipment....
Ted
Amazing.....

by D. Brooks – 1st Jun 2013

Fantastic product. Simple to set up, easy to use and slips right on the side of the MAKERS heatsink. HIGHLY RECOMMENDED! Thanks for everything Milad!!