Loading... Please wait...
  • LEDs in picture are not exactly as shown
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

Solderless CREE XT-E 3UP

0.10 Ounces
Calculated at checkout


Product Description

***UPDATE***  In stock and shipping daily

Say no to disco!


One of the main issues with LED arrays is color banding and separation, due to the LEDs being spaced out, causing their colors to not mix properly, which can be VERY distracting. This 3up PCB fixes that!


The PCB has one XT-E neutral white and two XT-E royal blue, which is now the gold standard in DIY LED arrays for reef aquariums. It has separate solder pads for each LED so you can run all three separate, or put a solder blob between two sets to run all three in series.


The XT-E used on the star are bins R4 for neutral white and Q04 for royal blue, the highest flux available, with royal blue having a 5nm wavelength distribution for higher quality.

For wiring of the 3UPs please check picture 7 and 8 (press the > arrow) on this product page


High quality Carclo 40 degree optics available that easily slide into the holes on the star, use a small bit of thermal adhesive or silicone to ensure they stay put.

Other Details

6.3w (700mA), 9.3w (1,000mA)
Max Drive Current:
Forward voltage:
9v (700mA), 9.3v (1,000mA)
Luminous flux (Neutral white):
228lm (700mA), 306lm (1,000mA)
Radiant flux (Royal blue):
1,050mW (700mA), 1,440mW (1,000mA)
Viewing angle:
Neutral white x1, Royal Blue x2
Star Size:
XTeawT-00-0000-000000Ge4 and XTearY-00-0000-000000Q04


There are 2 review(s) for Solderless CREE XT-E 3UP

  • easy to work with

    by Unknown – 5th Nov 2013

    Saves time, simplifies layout. Great product.

  • Awesome LED

    by Raul (SNRFishies) – 12th Aug 2013

    Awesome LED. great color combo and very bright using very little space. The solderless attachments make it so easy to set up your lights in a hurry.
    Will buy again when I need more light