CREE Lumia 5.2 - 70w Full Spectrum 5 Channel CREE LED

  This exclusive LED, the CREE Lumia 5.2,  is perfect if you want a simple yet powerful way to setup your LED lighting. Lumia, meaning art created with light, brings a full spectrum light to your corals/fish that really brings the colors and beauty out in them with an emphasis on keeping power consumption low. We have taken our experiencing in designing fixtures for commercial and DIY customers and developed a chip that delivers a full spectrum punch with a small footprint on a high end solid copper board designed to out perform other LEDs in its class.  The board itself has a strong role in this LEDs perfection by reducing the heat of the LEDs so quickly they can produce their highest amount of light and last a very long time. Expect to use only 1-2 of these high performance LEDs per 24x24x24 area in most scenarios. Each channel is individually addressable (they can be individually dimmed) so you can adjust the perfect color for your tank.   Layout: Channel 1 -  3 Hyper Violet and 2 CREE XT-E Royal Blue (Actinic channel) (18v @ 700mA) Channel 2 - Royal Blue (base blue spectrum) (16.5V @ 1500mA) Channel 3 - 3 XT-E Netural White and 2 XT-E Warm White (base white color) (16.5V @ 1500mA) Channel 4 - Turquoise / CREE XPE2 Blue (enhanced color spectrum) (17.2V @ 700mA) Channel 5 -  3 Hyper Violet and 2 CREE XT-E Royal Blue (Actinic channel) (18v @ 700mA)   This full spectrum LED chip is designed with exclusive Exotic LEDs.  Its also designed to fit perfectly on your MakersLED Heatsink FAQ Q:  Why is there Warm White LEDs on the chip? A:  We have done a lot of research to identify the best combination of wavelengths to provide growth and overall color.  In the past, it was just about putting royal blue and cool white into a 1:1 mix which provided good growth.  Our tests show adding more of a red spectrum (which is found in our Deep Red 660nm and Warm Whites) produces a better overall color and allows corals to really show their unique colors which would rarely show in a basic configuration? Q:  Which connectors do I need? A:  If you have one of these Lumia in series then you just need the "dual Molex connectors".  If you have 2 or more in series (usually it would only be two) then you need one of the "dual Molex connectors" and then one of the "Molex interconnects" per additional LED in series.  Q:  What do I need to power the Lumia? A:  There are several different ways to power the Lumia.  Some standard ways are covered in the arcticle located:  http://ledgroupbuy.zendesk.com/entries/24847592-What-do-I-need-to-power-the-Lumia-5-1-LED Q:  Why should I choose the Lumia? A:  We take pride in making sure our customers get the best performance at the lowest cost. The LEDs we implement in the Lumia are of the top grade and some are only available from LEDgroupbuy such as the violet strings. In most cases, they will outlast your tank. Don't settle for sub par LEDs that will only last a couple months.  Q:  What is the difference between this LED and the original Lumia 5.1 A:  We have taken the original Lumia 5.1 and expanded on it by adding a range of High End CREE LEDs.  These CREE LEDs produce more light for less power.  For instance, you can power 2 of the CREE Lumia 5.2 with only 5 LDD drivers and 1 180w power supply.     CREE Lumia 5.2 spectral chart: